Specifications
Infusion Fluid/Blood Warmer Heater
Flow Rate: 2~20ml/min
Tube Size:3.0~4.0mm
Classification:Class I / Type B
Veterinary/Vet Infusion Warmer
High accurate digital control for temperature
Portable and easy to use
Verinary/Vet Infusion Warmer
High accurate digital control for temperature
Portable and easy to use.
High quality & Beautiful design
Special light for night operation;
Portable and easy to use.
Infusion Fluid Warmer HIP-TF-II is an indirect heating device (dry heat warmer) and can be used repeatedly with standard IV infusion tubing set. The transfused fluid is heated up while passing through the infusion tube which is placed in‘S’shaped channel on the heating plate of the warmer. HIP-TF-II is reliable and easy to use in various clinic sites.
Benefits
1. Portable and easy to use.
2. No special training is required.
3. Setup can be finished in 1 minute at most.
4. High accurate digital control for temperature.
5. Infusion fluid is regulated automatically to the set temperature in short time.
6. Acoustic and visible alarming mechanism prevents from over-temperature; automatic power cut-out protect patient from overheat of fluid.
7. Saving your cost because no special disposable sets are needed. HIP-TF-II is just used with standard I.V. tubing.
Applications
Routine transfusion.
Low flow rate infusion in ICU.
Transfusion exchange
High calorie infusion
Tube Size
3.0~4.0mm
Flow Rate
2~12ml/min (against temperature span: 25°C~41°C)
Power
110V±11V (AC) or 220V±23V (AC) Max. 70W
50±2%Hz
Classification
Class I / Type B
Operation Conditions
5~40°C; Relative humidity: ≤ 80%
Packing Dimension: 36.5x15.5x12.5cm
Weight:600g